Well-designed Pdc Bit 16″ 6 Blades - Mill Shoe – DeepFast
Well-designed Pdc Bit 16″ 6 Blades - Mill Shoe – DeepFast Detail:
Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .
Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.
The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.
Introduction
It is suitable for grinding the bottom hole in the casing.
Features
1.Special Design: It has the flat-top crown-shaped high-density natural diamond tooth.
2.High-quality natural diamond: it can increase the speed and prolong the life of the mill shoes.
Specifications:
|
IADC code |
M813 |
|
Total flow area |
0.7 in2 |
|
Cutting Structure |
Natural Diamond 12pcs/ct. |
|
Standard gauge length |
1.0″~2.0″（25.4mm~50.8 mm） |
|
API connection |
2-3/8″API Reg. |
Recommended Parameters:
|
Flow rate |
10~16 L/S |
|
Rotating speed |
60~180rpm |
|
Drilling pressure |
9~40 KN |
The drag bit has a central core, with at least three, but as many as eight, triangular cutting surfaces. The cutting edges of all or at least half of the total number of the bit’s teeth face the forward end of the bit. Any other cutting edges face the drill string, so that the bit may be used while moving in either direction.
Designed for use in soft formations such as sand, clay or some types of soft rock. And drag bits made with tungsten carbide teeth can improve the performance in hard rock formations.
Product detail pictures:
Related Product Guide:
Our company promises all users of the first-class products and the most satisfying post-sale service. We warmly welcome our regular and new customers to join us for Well-designed Pdc Bit 16″ 6 Blades - Mill Shoe – DeepFast , The product will supply to all over the world, such as: Japan, South Korea, luzern, Qualified R&D engineer might be there for your consultation service and we will try our best to meet your requirements. So you should feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we are going to surely present you with the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we'll make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we're here to welcome your inquiries for any of our merchandise and service.
By Mary from Honduras - 2018.09.12 17:18
In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
By Martina from Pakistan - 2017.08.16 13:39
