Top Quality Impregnated Bit - Matrix Body PDC Core Bit – DeepFast
Top Quality Impregnated Bit - Matrix Body PDC Core Bit – DeepFast Detail:
Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .
Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.
The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.
Introduction:
It is resistant to erosion with long service life which can greatly improve drilling effeciency and save cost.
Features
1.Drilling in medium to hard formations: The drill bit has medium and short parabolic crowns, knife-wing teeth and medium-high density cloth teeth. It can obtain higher rotary speed in formations with low compressive strength and a small amount of abrasiveness.
2.Proprietary Cutting Teeth: 13mm imported special cutting teeth improves the ability to drill hard interlayer.
3.Strengthened Gauge: The use of high strength material improves the wear resistance of gauge and makes it have a longer life with the drill bits.
Product Specifications:
IADC code | M232 |
Number of blades | 12 |
Total flow area | 0.2~1.0 in2(1.3~6.5 cm2) |
Main cutting tooth | 13 |
Standard gauge length | 1″~1.5″(25~38 mm) |
Upper buckle torque | 13.4~16.3KN·m |
Core barrel size | 6-3/4″×4″ |
Recommended Operating Parameters:
Flow rate | 10~30 L/S |
Rotating speed | 40~150 RPM |
Drilling pressure | 30~80KN |
Product detail pictures:
Related Product Guide:
With sophisticated technologies and facilities, strict top quality handle, reasonable value, exceptional support and close co-operation with clients, we are devoted to furnishing the ideal worth for our clients for Top Quality Impregnated Bit - Matrix Body PDC Core Bit – DeepFast , The product will supply to all over the world, such as: Sudan, Malaysia, Germany, We hope we can establish long-term cooperation with all of the customers, and hope we can improve competitiveness and achieve the win-win situation together with the customers. We sincerely welcome the customers from all over the world to contact us for anything you need to have!Welcome all customers both at home and abroad to visit our factory. We hope to have win-win business relationships with you, and create a better tomorrow.
By Cindy from Dominica - 2017.02.18 15:54
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Zoe from Oman - 2018.06.18 19:26