Super Lowest Price Gauge Pdc Bit - Micro Core Bit – DeepFast
Super Lowest Price Gauge Pdc Bit - Micro Core Bit – DeepFast Detail:
Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .
Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.
The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.
Introduction:
It is suitable for coring operations in medium and hard formation with long life time feature.
Features
1.Unique Blade Design: Importing exclusive cutting teeth and unique curved blade design improve the ability of drilling in hard interlayer.
2. The high-quality composite: It effectively improves the performance and life of the drill bit. Cutting structure has strong aggressiveness.
3. The special layout: The special layout of the blade water hole improves the cooling and cleaning ability of the bit, and improves the efficiency of cuttings migration.
Product Specifications:
IADC code | M715 |
Number of blades | 12 |
Total flow area | 0.8~1.0 in2 |
Cutting structure | Natural Diamond |
Standard gauge length | 1-1/2“(38.1 mm) |
Upper buckle torque | 7.0~11.5KN·m |
Core barrel size | 4-3/4“×2 5/8“(Chuan 5-4/5) |
Recommended Operating Parameters:
Flow rate | 10~15 L/S |
Rotary Speed | 40~100 RPM |
Weight on bit | 20~75 KN |
Product detail pictures:
Related Product Guide:
carry on to boost, to guarantee products excellent in line with market and consumer standard specifications. Our enterprise has a quality assurance system are actually established for Super Lowest Price Gauge Pdc Bit - Micro Core Bit – DeepFast , The product will supply to all over the world, such as: Jamaica, Estonia, Turkey, Since the establishment of our company, we've realized the importance of providing good quality goods and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question points they do not understand. We break down these barriers to ensure you get what you want to the level you expect, when you want it.
By Gwendolyn from Peru - 2018.05.13 17:00
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Geraldine from Liverpool - 2018.11.22 12:28