Quality Inspection for Pdc Bi-Center Bit - Impregnated Drill Bit – DeepFast
Quality Inspection for Pdc Bi-Center Bit - Impregnated Drill Bit – DeepFast Detail:
Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .
Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.
The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.
Introduction:
Impregnated Diamond Bit has Cylindrical toothed blade which has higher penetration rates in hard and dense hard plastic interaction formations.
Features
1.Targeted design:It has special design for high compressive strength and abrasive formation. It is suitable for denser shale and argillaceous sandstone, and quartz sandstone with high abrasiveness, mudstone and sandstone interlaced strata are more suitable.
2. Unique inner cone structure: The unique geometry and arrangement of the inner cone of the drill bit improves the cutting performance at the center of the drill bit to extend the overall life of the drill bit.
Technology
1.The unique matrix formula: The formula of matrix powder with independent intellectual property rights and advanced sintering technology have made the mechanical properties of matrix reach the international advanced level.
2. Wide and deep flow channel design: The radial wide and deep flow channel is beneficial to the cleaning and transportation of cuttings and prevents bit balling.
Product Specifications:
IADC code | M842 |
Number of blades | 15 |
Total flow area | 2.4 in2 |
Cutting structure | Impregnated block |
Standard gauge length | 2.0″(50.8 mm) |
Upper buckle torque | 4-1/2″ Reg. |
Flow rate | 400~600 GPM / 10~40L/S |
Rotating speed | 20~300RPM |
Drilling pressure | 20~ /80 KN |
Product detail pictures:
Related Product Guide:
We strive for excellence, services the customers", hopes to be the top cooperation team and dominator business for personnel, suppliers and prospects, realizes benefit share and continual promotion for Quality Inspection for Pdc Bi-Center Bit - Impregnated Drill Bit – DeepFast , The product will supply to all over the world, such as: Brunei, Angola, Oslo, The development of our company not only needs the guarantee of quality, reasonable price and perfect service, but also relies on our customer's trust and support! In the future, we will continue with the most professional and high quality service to provide the most competitive price, Together with our customers and achieve win-win! Welcome to inquiry and consult!
By Myra from New York - 2017.03.28 12:22
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Karen from Canberra - 2017.04.18 16:45