PriceList for Pdc Drill Bits - Impregnated Drill Bit – DeepFast
PriceList for Pdc Drill Bits - Impregnated Drill Bit – DeepFast Detail:
Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .
Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.
The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.
Introduction:
Impregnated Diamond Bit has Cylindrical toothed blade which has higher penetration rates in hard and dense hard plastic interaction formations.
Features
1.Targeted design：It has special design for high compressive strength and abrasive formation. It is suitable for denser shale and argillaceous sandstone, and quartz sandstone with high abrasiveness, mudstone and sandstone interlaced strata are more suitable.
2. Unique inner cone structure: The unique geometry and arrangement of the inner cone of the drill bit improves the cutting performance at the center of the drill bit to extend the overall life of the drill bit.
Technology
1.The unique matrix formula: The formula of matrix powder with independent intellectual property rights and advanced sintering technology have made the mechanical properties of matrix reach the international advanced level.
2. Wide and deep flow channel design: The radial wide and deep flow channel is beneficial to the cleaning and transportation of cuttings and prevents bit balling.
Product Specifications:
| IADC code | M842 |
| Number of blades | 15 |
| Total flow area | 2.4 in2 |
| Cutting structure | Impregnated block |
| Standard gauge length | 2.0″（50.8 mm） |
| Upper buckle torque | 4-1/2″ Reg. |
| Flow rate | 400～600 GPM / 10～40L/S |
| Rotating speed | 20~300RPM |
| Drilling pressure | 20~ /80 KN |
Product detail pictures:
Related Product Guide:
We pursue the management tenet of "Quality is remarkable, Company is supreme, Name is first", and will sincerely create and share success with all clientele for PriceList for Pdc Drill Bits - Impregnated Drill Bit – DeepFast , The product will supply to all over the world, such as: Dubai, Guatemala, Melbourne, Our expert engineering team will generally be prepared to serve you for consultation and feedback. We're able to also give you with free of charge samples to meet your requirements. Best efforts will likely be produced to provide you the best service and merchandise. When you are keen on our business and items, make sure you speak to us by sending us emails or call us quickly. In an effort to know our merchandise and company extra, you may come to our factory to view it. We'll generally welcome guests from all over the world to our business to create business relations with us. Be sure to feel cost-free to speak to us for small business and we believe we are going to share the best trading experience with all our merchants.
By Claire from Sri Lanka - 2018.05.22 12:13
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Helen from Maldives - 2018.09.21 11:44
