Online Exporter Oil And Gas Drill Bit Manufacture - Mill Shoe – DeepFast
Online Exporter Oil And Gas Drill Bit Manufacture - Mill Shoe – DeepFast Detail:
Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .
Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.
The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.
Introduction
It is suitable for grinding the bottom hole in the casing.
Features
1.Special Design: It has the flat-top crown-shaped high-density natural diamond tooth.
2.High-quality natural diamond: it can increase the speed and prolong the life of the mill shoes.
Specifications:
IADC code |
M813 |
Total flow area |
0.7 in2 |
Cutting Structure |
Natural Diamond 12pcs/ct. |
Standard gauge length |
1.0″~2.0″(25.4mm~50.8 mm) |
API connection |
2-3/8″API Reg. |
Recommended Parameters:
Flow rate |
10~16 L/S |
Rotating speed |
60~180rpm |
Drilling pressure |
9~40 KN |
The drag bit has a central core, with at least three, but as many as eight, triangular cutting surfaces. The cutting edges of all or at least half of the total number of the bit’s teeth face the forward end of the bit. Any other cutting edges face the drill string, so that the bit may be used while moving in either direction.
Designed for use in soft formations such as sand, clay or some types of soft rock. And drag bits made with tungsten carbide teeth can improve the performance in hard rock formations.
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" may be the persistent conception of our organization for that long-term to establish jointly with customers for mutual reciprocity and mutual gain for Online Exporter Oil And Gas Drill Bit Manufacture - Mill Shoe – DeepFast , The product will supply to all over the world, such as: Panama, Argentina, Denver, With the development of the society and economy, our company will continue the "loyalty, dedication, efficiency, innovation" spirit of enterprise, and we will always adhere to the management idea of "would rather lose gold, do not lose customers heart". We will serve the domestic and foreign businessmen with sincere dedication, and let us create bright future together with you!
By Bess from New Zealand - 2018.06.03 10:17
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Beryl from Congo - 2017.09.16 13:44