New Fashion Design for Tricone Bits Suppliers - Mill Shoe – DeepFast
New Fashion Design for Tricone Bits Suppliers - Mill Shoe – DeepFast Detail:
Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .
Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.
The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.
Introduction
It is suitable for grinding the bottom hole in the casing.
Features
1.Special Design: It has the flat-top crown-shaped high-density natural diamond tooth.
2.High-quality natural diamond: it can increase the speed and prolong the life of the mill shoes.
Specifications:
IADC code |
M813 |
Total flow area |
0.7 in2 |
Cutting Structure |
Natural Diamond 12pcs/ct. |
Standard gauge length |
1.0″~2.0″(25.4mm~50.8 mm) |
API connection |
2-3/8″API Reg. |
Recommended Parameters:
Flow rate |
10~16 L/S |
Rotating speed |
60~180rpm |
Drilling pressure |
9~40 KN |
The drag bit has a central core, with at least three, but as many as eight, triangular cutting surfaces. The cutting edges of all or at least half of the total number of the bit’s teeth face the forward end of the bit. Any other cutting edges face the drill string, so that the bit may be used while moving in either direction.
Designed for use in soft formations such as sand, clay or some types of soft rock. And drag bits made with tungsten carbide teeth can improve the performance in hard rock formations.
Product detail pictures:
Related Product Guide:
Our commission should be to provide our customers and consumers with ideal top quality and aggressive portable digital products for New Fashion Design for Tricone Bits Suppliers - Mill Shoe – DeepFast , The product will supply to all over the world, such as: Malta, United Kingdom, Casablanca, we rely on own advantages to build a mutual-benefit commerce mechanism with our cooperative partners. As a result, we have gained a global sales network reaching the Middle East, Turkey, Malaysia and Vietnamese.
By Pamela from Canberra - 2018.07.26 16:51
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Debby from Belarus - 2017.08.18 11:04