Wholesale New Arrival China Rotary Drill Bit - Natural Diamond Core Bit – DeepFast factory and suppliers

New Arrival China Rotary Drill Bit - Natural Diamond Core Bit – DeepFast

Send email to us

Product Detail

Product Tags

Feedback (2)

Dedicated to strict top quality command and considerate purchaser support, our experienced staff customers are always available to discuss your necessities and be certain full client gratification for 197mm Downhole Motor, Diamond Tipped Core Drill Bits, Used Oilfield Drill Bits For Sale, We are willing to give you the best suggestions on the designs of your orders in a professional way if you need. In the meantime, we keep on developing new technologies and creating new designs so as to make you ahead in the line of this business.

New Arrival China Rotary Drill Bit - Natural Diamond Core Bit – DeepFast Detail:

Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .

Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.

The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.

Drilling in extremely hard formations It is suitable for coring in extremely hard abrasive formations, such as sandstone.

Features

◆Curved crown
The curved crown has a smooth core

◆Radiant waterway design
The bit has radiant waterway design which is suitable for high speed.

Technology

◆The self-sharpening impregnated insert
The self-sharpening impregnated insert keeps the cutting sharp during drilling.

◆The unique matrix formula
The unique matrix formula makes the matrix match the wear and formation,optimizes the cutting

Introduction:

Drilling in medium to hard formations. It is suitable for coring in medium to hard formations with a certain degree of abrasive formation.

Features

1.Drilling in medium to hard formations: It is suitable for coring in medium to hard formations with a certain degree of abrasive formation.

2.High-density tooth arrangement: Medium and high-density tooth arrangement design and high-quality natural diamond can improve drilling speed and prolong the service life of drill bit.

3.The unique matrix formula: The unique matrix formula makes the matrix match the wear and formation, optimizes the cutting edge and wear resistance of diamond which makes the bit obtain a better ROP.

4.Radiant waterway design: The bit has radiant waterway design which is suitable for high speed.aterway design which is suitable for high speed.

Product Specifications:

IADC code	M712
Number of blades	18
Total flow area	0.9 in2
Cutting structure	Natural diamond
Standard gauge length	1-1/2″（38.1 mm）
Upper buckle torque	13.4~16.3KN•m
Core barrel size	6-3/4″×4″(川7-4/5）

Recommended Operating Parameters:

Flow rate	10~30 L/S
Rotating speed	40~80RPM
Drilling pressure	20~80 KN

Product detail pictures:

Related Product Guide:

The corporation keeps to the operation concept "scientific management, superior quality and performance primacy, consumer supreme for New Arrival China Rotary Drill Bit - Natural Diamond Core Bit – DeepFast , The product will supply to all over the world, such as: Irish, Tunisia, Brazil, Due to good quality and reasonable prices, our products have been exported to more than 10 countries and regions. We are looking forward to cooperating with all customers from at home and abroad. Moreover, customer satisfaction is our eternal pursuit.

Core Bit Set