High Performance Drag Bits For Mining - Impregnated Drill Bit – DeepFast
High Performance Drag Bits For Mining - Impregnated Drill Bit – DeepFast Detail:
Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .
Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.
The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.
Introduction:
Impregnated Diamond Bit has Cylindrical toothed blade which has higher penetration rates in hard and dense hard plastic interaction formations.
Features
1.Targeted design:It has special design for high compressive strength and abrasive formation. It is suitable for denser shale and argillaceous sandstone, and quartz sandstone with high abrasiveness, mudstone and sandstone interlaced strata are more suitable.
2. Unique inner cone structure: The unique geometry and arrangement of the inner cone of the drill bit improves the cutting performance at the center of the drill bit to extend the overall life of the drill bit.
Technology
1.The unique matrix formula: The formula of matrix powder with independent intellectual property rights and advanced sintering technology have made the mechanical properties of matrix reach the international advanced level.
2. Wide and deep flow channel design: The radial wide and deep flow channel is beneficial to the cleaning and transportation of cuttings and prevents bit balling.
Product Specifications:
IADC code | M842 |
Number of blades | 15 |
Total flow area | 2.4 in2 |
Cutting structure | Impregnated block |
Standard gauge length | 2.0″(50.8 mm) |
Upper buckle torque | 4-1/2″ Reg. |
Flow rate | 400~600 GPM / 10~40L/S |
Rotating speed | 20~300RPM |
Drilling pressure | 20~ /80 KN |
Product detail pictures:
Related Product Guide:
Quality comes first; service is foremost; business is cooperation" is our business philosophy which is constantly observed and pursued by our company for High Performance Drag Bits For Mining - Impregnated Drill Bit – DeepFast , The product will supply to all over the world, such as: Johannesburg, Nairobi, Canberra, We have been committed to meet all your needs and solve any technical problems you may encounter with your industrial components. Our exceptional products and vast knowledge of technology makes us the preferred choice for our customers.
By Nicole from Doha - 2018.02.04 14:13
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Gary from Gambia - 2018.09.08 17:09