Factory source Borewell Drilling Bits - Matrix Body PDC Core Bit – DeepFast
Factory source Borewell Drilling Bits - Matrix Body PDC Core Bit – DeepFast Detail:
Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .
Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.
The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.
Introduction:
It is resistant to erosion with long service life which can greatly improve drilling effeciency and save cost.
Features
1.Drilling in medium to hard formations: The drill bit has medium and short parabolic crowns, knife-wing teeth and medium-high density cloth teeth. It can obtain higher rotary speed in formations with low compressive strength and a small amount of abrasiveness.
2.Proprietary Cutting Teeth: 13mm imported special cutting teeth improves the ability to drill hard interlayer.
3.Strengthened Gauge: The use of high strength material improves the wear resistance of gauge and makes it have a longer life with the drill bits.
Product Specifications:
IADC code | M232 |
Number of blades | 12 |
Total flow area | 0.2~1.0 in2(1.3~6.5 cm2) |
Main cutting tooth | 13 |
Standard gauge length | 1″~1.5″(25~38 mm) |
Upper buckle torque | 13.4~16.3KN·m |
Core barrel size | 6-3/4″×4″ |
Recommended Operating Parameters:
Flow rate | 10~30 L/S |
Rotating speed | 40~150 RPM |
Drilling pressure | 30~80KN |
Product detail pictures:
Related Product Guide:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of team building, attempting hard to boost the standard and liability consciousness of personnel customers. Our corporation successfully attained IS9001 Certification and European CE Certification of Factory source Borewell Drilling Bits - Matrix Body PDC Core Bit – DeepFast , The product will supply to all over the world, such as: Auckland, Qatar, Niger, Honest to every customers are our requested! First-class serve, best quality, best price and fastest delivery date is our advantage! Give every customers good serve is our tenet! This makes our company get the favour of customers and support! Welcome all over the world customers send us enquiry and looking forward your good co-operation !Make sure you your inquiry for more details or request for dealership in selected regions.
By Eric from French - 2017.05.02 18:28
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By ron gravatt from Dominica - 2018.06.03 10:17