Discount wholesale Core Cutting Bit - Matrix Body PDC Core Bit – DeepFast
Discount wholesale Core Cutting Bit - Matrix Body PDC Core Bit – DeepFast Detail:
Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .
Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.
The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.
Introduction:
It is resistant to erosion with long service life which can greatly improve drilling effeciency and save cost.
Features
1.Drilling in medium to hard formations: The drill bit has medium and short parabolic crowns, knife-wing teeth and medium-high density cloth teeth. It can obtain higher rotary speed in formations with low compressive strength and a small amount of abrasiveness.
2.Proprietary Cutting Teeth: 13mm imported special cutting teeth improves the ability to drill hard interlayer.
3.Strengthened Gauge: The use of high strength material improves the wear resistance of gauge and makes it have a longer life with the drill bits.
Product Specifications:
IADC code | M232 |
Number of blades | 12 |
Total flow area | 0.2~1.0 in2(1.3~6.5 cm2) |
Main cutting tooth | 13 |
Standard gauge length | 1″~1.5″(25~38 mm) |
Upper buckle torque | 13.4~16.3KN·m |
Core barrel size | 6-3/4″×4″ |
Recommended Operating Parameters:
Flow rate | 10~30 L/S |
Rotating speed | 40~150 RPM |
Drilling pressure | 30~80KN |
Product detail pictures:
Related Product Guide:
The customer satisfaction is our primary goal. We uphold a consistent level of professionalism, quality, credibility and service for Discount wholesale Core Cutting Bit - Matrix Body PDC Core Bit – DeepFast , The product will supply to all over the world, such as: Juventus, luzern, Spain, We've got sufficient experience in producing products according to samples or drawings. We warmly welcome customers from home and abroad to visit our company, and to cooperate with us for a splendid future together.
By Alexander from Cambodia - 2017.11.11 11:41
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Sara from Rotterdam - 2017.01.28 18:53