Wholesale Cheapest Price Pdc Bit 6 1/2″ 6 Blades - Natural Diamond Core Bit – DeepFast factory and suppliers

Cheapest Price Pdc Bit 6 1/2″ 6 Blades - Natural Diamond Core Bit – DeepFast

Send email to us

Product Detail

Product Tags

Feedback (2)

We thinks what clients think, the urgency of urgency to act from the interests of a purchaser position of principle, allowing for greater top quality, decrease processing costs, price ranges are much more reasonable, won the new and aged prospects the support and affirmation for Pdc Cutters, Diamond Core Drill Bits For Rock, Pdc Bit 6 1/2" 5 Blades, We adhere to the tenet of "Services of Standardization, to Meet Customers' Demands".

Cheapest Price Pdc Bit 6 1/2″ 6 Blades - Natural Diamond Core Bit – DeepFast Detail:

Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .

Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.

The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.

Drilling in extremely hard formations It is suitable for coring in extremely hard abrasive formations, such as sandstone.

Features

◆Curved crown
The curved crown has a smooth core

◆Radiant waterway design
The bit has radiant waterway design which is suitable for high speed.

Technology

◆The self-sharpening impregnated insert
The self-sharpening impregnated insert keeps the cutting sharp during drilling.

◆The unique matrix formula
The unique matrix formula makes the matrix match the wear and formation,optimizes the cutting

Introduction:

Drilling in medium to hard formations. It is suitable for coring in medium to hard formations with a certain degree of abrasive formation.

Features

1.Drilling in medium to hard formations: It is suitable for coring in medium to hard formations with a certain degree of abrasive formation.

2.High-density tooth arrangement: Medium and high-density tooth arrangement design and high-quality natural diamond can improve drilling speed and prolong the service life of drill bit.

3.The unique matrix formula: The unique matrix formula makes the matrix match the wear and formation, optimizes the cutting edge and wear resistance of diamond which makes the bit obtain a better ROP.

4.Radiant waterway design: The bit has radiant waterway design which is suitable for high speed.aterway design which is suitable for high speed.

Product Specifications:

IADC code	M712
Number of blades	18
Total flow area	0.9 in2
Cutting structure	Natural diamond
Standard gauge length	1-1/2″（38.1 mm）
Upper buckle torque	13.4~16.3KN•m
Core barrel size	6-3/4″×4″(川7-4/5）

Recommended Operating Parameters:

Flow rate	10~30 L/S
Rotating speed	40~80RPM
Drilling pressure	20~80 KN

Product detail pictures:

Related Product Guide:

Innovation, good quality and reliability are the core values of our enterprise. These principles today extra than ever form the basis of our success as an internationally active mid-size organization for Cheapest Price Pdc Bit 6 1/2″ 6 Blades - Natural Diamond Core Bit – DeepFast , The product will supply to all over the world, such as: Bhutan, Bangkok, Oman, Since its foundation , the company keeps living up to the belief of "honest selling , best quality , people-orientation and benefits to customers. " We are doing everything to offer our customers with best services and best products . We promise that we'll be responsible all the way to the end once our services begin.

1607 Pdc Bit