2021 New Style Impregnated Diamond Core Drill Bits - Matrix Body PDC Core Bit – DeepFast
2021 New Style Impregnated Diamond Core Drill Bits - Matrix Body PDC Core Bit – DeepFast Detail:
Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .
Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.
The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.
Introduction:
It is resistant to erosion with long service life which can greatly improve drilling effeciency and save cost.
Features
1.Drilling in medium to hard formations: The drill bit has medium and short parabolic crowns, knife-wing teeth and medium-high density cloth teeth. It can obtain higher rotary speed in formations with low compressive strength and a small amount of abrasiveness.
2.Proprietary Cutting Teeth: 13mm imported special cutting teeth improves the ability to drill hard interlayer.
3.Strengthened Gauge: The use of high strength material improves the wear resistance of gauge and makes it have a longer life with the drill bits.
Product Specifications:
| IADC code | M232 |
| Number of blades | 12 |
| Total flow area | 0.2~1.0 in2(1.3~6.5 cm2) |
| Main cutting tooth | 13 |
| Standard gauge length | 1″~1.5″（25~38 mm） |
| Upper buckle torque | 13.4~16.3KN·m |
| Core barrel size | 6-3/4″×4″ |
Recommended Operating Parameters:
| Flow rate | 10~30 L/S |
| Rotating speed | 40~150 RPM |
| Drilling pressure | 30~80KN |
Product detail pictures:
Related Product Guide:
Our organization sticks to your principle of "Quality may be the life of your organization, and reputation will be the soul of it" for 2021 New Style Impregnated Diamond Core Drill Bits - Matrix Body PDC Core Bit – DeepFast , The product will supply to all over the world, such as: St. Petersburg, Ghana, Slovenia, We aim to build a famous brand which can influence a certain group of people and light up the whole world. We want our staff to realize self-reliance, then achieve financial freedom, lastly obtain time and spiritual freedom. We do not focus on how much fortune we can make, instead we aim to obtain high reputation and be recognized for our goods. As a result, our happiness comes from our clients satisfaction rather than how much money we earn. Ours team will do best for you personally always.
By Delia Pesina from Mauritius - 2018.04.25 16:46
Problems can be quickly and effectively resolved, it is worth to be trust and working together.
By Alice from Mongolia - 2018.12.25 12:43
-
Factory Cheap Hot Steerable Reamer While Drilli...
-
Factory Supply 1606 Pdc Bit - Impregnated Bit ...
-
Factory best selling Diamond Carbide Drill Bit ...
-
High definition 216mm Downhole Motor - Two-Sta...
-
Professional China Downhole Motor Manufacturer ...
-
Low MOQ for 26 Pdc Bit - Two-Stage and Two-Spe...
