Wholesale Top Suppliers Pdc Bit 12 1/4″ 5 Blades - Impregnated Core Bit – DeepFast factory and suppliers

Top Suppliers Pdc Bit 12 1/4″ 5 Blades - Impregnated Core Bit – DeepFast

Send email to us

Product Detail

Product Tags

Feedback (2)

we are able to provide good quality items, aggressive rate and best shopper assistance. Our destination is "You come here with difficulty and we provide you with a smile to take away" for Oil Rig Equipment, German Rubber Downhole Motor, Bend Downhole Motor, As a key enterprise of this industry, our company makes efforts to become a leading supplier, based on the faith of professional quality & worldwide service.

Top Suppliers Pdc Bit 12 1/4″ 5 Blades - Impregnated Core Bit – DeepFast Detail:

Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .

Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.

The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.

Drilling in extremely hard formations It is suitable for coring in extremely hard abrasive formations, such as sandstone.

Features

◆Curved crown
The curved crown has a smooth core

◆Radiant waterway design
The bit has radiant waterway design which is suitable for high speed.

Technology

◆The self-sharpening impregnated insert
The self-sharpening impregnated insert keeps the cutting sharp during drilling.

◆The unique matrix formula
The unique matrix formula makes the matrix match the wear and formation,optimizes the cutting

Introduction:

It is suitable for coring in extremely hard abrasive formations, such as sandstone.

Features

1.Curved crown: The curved crown has a smooth core

2.The self-sharpening impregnated insert: The self-sharpening impregnated insert keeps the cutting sharp during drilling.

3.The unique matrix formula: The unique matrix formula makes the matrix match the wear and formation, optimizes the cutting edge and wear resistance of diamond which makes the bit obtain a better ROP.

4.Radiant waterway design: The bit has radiant waterway design which is suitable for high speed.

Product Specifications:

IADC code	M842
Number of blades	15
Total flow area	1.0 in2
Cutting structure	Pregnancy block
Standard gauge length	1-1/2″（38.1 mm）
Upper buckle torque	13.4~16.3KN•m
Core barrel size	6-3/4″×4″(川7-4/5)

Recommended Operating Parameters:

Flow rate	10~30 L/S
Rotating speed	40~150RPM
Drilling pressure	30~80 KN

Impregnated Core Bit Complete Core Service

in Extremely Hard and Deep Formation

4-2

CHALLENGES

Extremely hard and abrasive formation

The depth is about 4,000 meters

Request for high recovery rate

SOLUTION

In order to solve these problems, DeepFast offers Impregnated Core Bit 8 1/2” x 4” DIC280 to achieve this goal in deep and hard formation.

RESULTS

With the core cut 1 15 meters in two runs. which is from 3805 to 3920 meters

The coring time is about 20 hours, and ROPIS 5.75 m/h

The recovery rate is more than 85%

Overview

In the Liaohe Oilfield in China, the operator Liaohe Oilfield Coring Technology Services planned to drilling in the deep well of 3805 meters. The formation is extremely hard and lithology is granite with the compress strength more than 24000PSL. Its objective was to core the 8 1/2” hole section of the well to recover the hard formation. The normal PDC core bit had only low recover rate and less core cut. Therefore Deepfast offers its new designed Impregnated Core Bit to achieve this goal in deep and hard formation.

Product detail pictures:

Related Product Guide:

With dependable high-quality method, fantastic standing and ideal purchaser assistance, the series of products produced by our firm are exported to many countries and regions for Top Suppliers Pdc Bit 12 1/4″ 5 Blades - Impregnated Core Bit – DeepFast , The product will supply to all over the world, such as: Angola, San Francisco, Romania, "Good quality, Good service " is always our tenet and credo. We take every effort to control the quality, package, labels etc and our QC will check every detail during producing and before shipment. We are willing to establish long business relationship with those who seek the high quality products and good service. We have set up a wide sales network across European countries, North of America, South of America, Middle East, Africa, East Asia countries.Please contact us now, you will find our professional experience and high quality grades will contribute to your business.

6 1/2 Pdc Bit