Quality Inspection for Pdc Bi-Center Bit - Matrix Body PDC Core Bit – DeepFast


Product Detail

Product Tags

Related Video

Feedback (2)

We thinks what customers think, the urgency of urgency to act in the interests of a customer position of principle, allowing for better quality, lower processing costs, prices are more reasonable, won the new and old customers the support and affirmation for Tungsten Carbide Coating, Diamond Core Drill Bit, 8 Blades Pdc Bit, We take quality as the foundation of our success. Thus, we focus on the manufacture of the best quality products. A strict quality management system has been created to ensure the quality of the products.
Quality Inspection for Pdc Bi-Center Bit - Matrix Body PDC Core Bit – DeepFast Detail:

Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .

Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.

The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.

Introduction:

It is resistant to erosion with long service life which can greatly improve drilling effeciency and save cost.

Features

1.Drilling in medium to hard formations: The drill bit has medium and short parabolic crowns, knife-wing teeth and medium-high density cloth teeth. It can obtain higher rotary speed in formations with low compressive strength and a small amount of abrasiveness.

2.Proprietary Cutting Teeth: 13mm imported special cutting teeth improves the ability to drill hard interlayer.

3.Strengthened Gauge: The use of high strength material improves the wear resistance of gauge and makes it have a longer life with the drill bits.

Product Specifications:

IADC code M232
Number of blades 12
Total flow area 0.2~1.0 in2(1.3~6.5 cm2)
Main cutting tooth 13
Standard gauge length 1″~1.5″(25~38 mm)
Upper buckle torque 13.4~16.3KN·m
Core barrel size 6-3/4″×4″

Recommended Operating Parameters:

Flow rate 10~30 L/S
Rotating speed 40~150 RPM
Drilling pressure 30~80KN

Product detail pictures:

Quality Inspection for Pdc Bi-Center Bit - Matrix Body PDC Core Bit – DeepFast detail pictures

Quality Inspection for Pdc Bi-Center Bit - Matrix Body PDC Core Bit – DeepFast detail pictures

Quality Inspection for Pdc Bi-Center Bit - Matrix Body PDC Core Bit – DeepFast detail pictures


Related Product Guide:

We have been experienced manufacturer. Wining the majority of your crucial certifications of its market for Quality Inspection for Pdc Bi-Center Bit - Matrix Body PDC Core Bit – DeepFast , The product will supply to all over the world, such as: Pretoria, Pakistan, Doha, Looking forward, we will keep pace with the times, continuing to create new products. With our strong research team, advanced production facilities, scientific management and top services, we will supply high quality products to our customers worldwide. We sincerely invite you to be our business partners for mutual benefits.
  • This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
    5 Stars By David Eagleson from Sacramento - 2018.06.03 10:17
    The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
    5 Stars By Erin from Mexico - 2018.09.16 11:31
    Write your message here and send it to us