OEM/ODM China Mining Drill Bit - Impregnated Drill Bit – DeepFast
OEM/ODM China Mining Drill Bit - Impregnated Drill Bit – DeepFast Detail:
Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .
Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.
The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.
Introduction:
Impregnated Diamond Bit has Cylindrical toothed blade which has higher penetration rates in hard and dense hard plastic interaction formations.
Features
1.Targeted design:It has special design for high compressive strength and abrasive formation. It is suitable for denser shale and argillaceous sandstone, and quartz sandstone with high abrasiveness, mudstone and sandstone interlaced strata are more suitable.
2. Unique inner cone structure: The unique geometry and arrangement of the inner cone of the drill bit improves the cutting performance at the center of the drill bit to extend the overall life of the drill bit.
Technology
1.The unique matrix formula: The formula of matrix powder with independent intellectual property rights and advanced sintering technology have made the mechanical properties of matrix reach the international advanced level.
2. Wide and deep flow channel design: The radial wide and deep flow channel is beneficial to the cleaning and transportation of cuttings and prevents bit balling.
Product Specifications:
IADC code | M842 |
Number of blades | 15 |
Total flow area | 2.4 in2 |
Cutting structure | Impregnated block |
Standard gauge length | 2.0″(50.8 mm) |
Upper buckle torque | 4-1/2″ Reg. |
Flow rate | 400~600 GPM / 10~40L/S |
Rotating speed | 20~300RPM |
Drilling pressure | 20~ /80 KN |
Product detail pictures:
Related Product Guide:
Our solutions are broadly acknowledged and dependable by users and may meet consistently developing economic and social requires for OEM/ODM China Mining Drill Bit - Impregnated Drill Bit – DeepFast , The product will supply to all over the world, such as: Bahamas, Portugal, Bhutan, So that you can utilize the resource from the expanding info in international trade, we welcome shoppers from everywhere on-line and offline. In spite of the good quality solutions we provide, effective and satisfying consultation service is supplied by our professional after-sale service team. Product lists and detailed parameters and any other info weil be sent to you timely for your inquiries. So you should make contact with us by sending us emails or call us if you have any questions about our corporation. ou may also get our address info from our web page and come to our company to get a field survey of our merchandise. We've been confident that we have been going to share mutual achievement and create strong co-operation relations with our companions in this marketplace. We're searching forward for your inquiries.
By Antonia from Tajikistan - 2017.08.18 18:38
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
By Sarah from Bangalore - 2017.08.18 18:38