OEM Manufacturer Oilfield Drill Bit Companies - Matrix Body PDC Drill Bit – DeepFast


Product Detail

Product Tags

Related Video

Feedback (2)

With dependable high quality approach, great reputation and excellent customer support, the series of products and solutions produced by our firm are exported to lots of countries and regions for 9 1/2 Pdc Bit, 7:8 Lobes Power Section, 7:8 Lobes Power Section, Never-ending improvement and striving for 0% deficiency are our two main excellent policies. Should you need anything, never be reluctant to speak to us.
OEM Manufacturer Oilfield Drill Bit Companies - Matrix Body PDC Drill Bit – DeepFast Detail:

Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .

Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.

The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.

13

Bit Size

8-1/2″

9-1/2″

12-1/4″

Number of Blade

6

6

6

Main Cutter Size

5/8″(16mm)

5/8″(16mm)

5/8″(16mm)

Main Cutter Qty

34-39

43-50

52-59

Gauge Length

2.0″(50.8 mm)

2.5″(63.5 mm)

3.0″(76.2 mm)

Nozzle Qty(type)

6SP

7SP

8SP

Junk Slot Area

15.9in2 (102.6cm2)

18.4in2(118.7cm2 )

42.0in2 (271cm2)

Make-up Length

13.2″(335.3mm)

14.3″(363.2mm)

14.5″(368.3mm)

API connection

4-1/2″ Reg.

6-5/8″ Reg.

6-5/8″ Reg.

Matrix Bits are optimal solution for well drilling where use of ordinary steel bits lead to their rapid erosive wear.

Manufacturing a matrix bit body from a composite material based on tungsten carbide allows bits to drill in high abrasive formations using weighted drilling mud.

Specially selected material compositions provide high reliability and durability for continuous bit runs.Improved designing and manufacturing technologies make it possible to produce a wide range of drilling tools.

Matrix tools can be multiply subjected to restoration. This feature allows increasing life-time of tools and achieve higher rates.

Introduction:

Matrix Body PDC Drill Bit is suitable for medium hard and hard formations with optimized crown profile and cutters layout. It can achieve better performance in deep intervals. Long service life and high performance help reduce the drilling cost.

Features

Durasef Gauge: Super strong material promotes gauge wear resistance to enhance long lifetime.

Hydraulics: The movement and cooling of cuttings can be optimized by the hydraulic design that matches the chip quantity and displacement of each blade

Technology

Unique Blade Design: Importing exclusive cutting teeth and unique curved blade design improve the ability of drilling in hard interlayer.

The formula of matrix powder: independent intellectual property rights and advanced sintering technology have made the mechanical properties of matrix reach the international advanced level. The blade of the matrix drill can be designed to be deeper and narrower. It can completely satisfy the complex drilling operation in the well.

Product Specifications:

IADC code M323
Number of Blade 6
number of nozzles 5
Total Cutters 36
Main Cutter Size 1/2″(16mm)
Gauge Length 2.0″(50.8cm)
Junk Slot Area 15.9in2 (102.6cm2)
API connection 4-1/2” Reg.

Recommended Operating Parameters:

Flow rate 100~350 GPM / 21~35 L/S
Rotary Speed 60~300 RPM
Weight on bit 3~15Klbs / 20~110 KN
Mix Weight on bit 20Klbs / 90 KN

One Matrix Body PDC Bit Drilled Successfully in Xujiahe Layer

in Sichuan China.

2-1

CHALLENGES

In order to reduce the quantity of PDC Bit drilling in Xujiahe Layer in the Sichuan of China. Chinese bit manufactures try to design enhanced PDC bit to drill by ONE BIT.

SOLUTION

Deepfast offer its own designed
Matrix Body PDC Bit 12 1/4 DF 1605BU to increase the lifetime of drilling bit.

RESULTS

It sets new Roprecord of 7.13

The bit drilled successfully in the layer by only One Bit

Overview

In the Sichuan of China. the formation is medium-hard but abrasive, Great Wall Drilling Company of CNPC try to increase drilling footage and reduce the quantity of PDC bits in Xujiahe Layer. In this layer, the depth is from 1300 to 1900 and the compress strength is 12000PSI-16000PS1. Deefast designs the Matrix Body PDC Bit 12 1/4″ DF1605BU for this project.

Technology Advantage

The Matrix Body PDC Bit 12 1/4″DF 1605BU is an improved bit specially developed for increasing the strength and lifetime of drill bits. The formula of matrix powder with independent intellectual property rights and advanced sintering technology have made the mechanical properties of matrix reach the international advanced level. Super strong material promotes gauge wear resistance to enhance long lifetime. It has the characteristics of high rotary speed stability and long service life while drilling.

Performance

It achieves best ROP of 10.61 m/h, and the average of ROP of five bits is 7.13 m/h.

All of bits drilled successfully in the layer by only One Bit.

12 1/4″ PDC Bit Drilling Performance

2-2


Product detail pictures:

OEM Manufacturer Oilfield Drill Bit Companies - Matrix Body PDC Drill Bit – DeepFast detail pictures

OEM Manufacturer Oilfield Drill Bit Companies - Matrix Body PDC Drill Bit – DeepFast detail pictures

OEM Manufacturer Oilfield Drill Bit Companies - Matrix Body PDC Drill Bit – DeepFast detail pictures


Related Product Guide:

We attempt for excellence, provider the customers", hopes to be the most beneficial cooperation team and dominator enterprise for staff, suppliers and shoppers, realizes value share and continuous advertising for OEM Manufacturer Oilfield Drill Bit Companies - Matrix Body PDC Drill Bit – DeepFast , The product will supply to all over the world, such as: Zurich, Jeddah, Mexico, Our professional engineering group will always be ready to serve you for consultation and feedback. We're able to also offer you with absolutely free samples to meet your requirements. Finest efforts will likely be produced to offer you the ideal service and goods. For anyone who is thinking about our company and merchandise, be sure to contact us by sending us emails or contact us quickly. As a way to know our merchandise and firm. lot more, you can come to our factory to find out it. We'll always welcome guests from all over the world to our business to build company relations with us. Be sure to feel free to get in touch with us for business and we believe we've been intending to share the top trading practical experience with all our merchants.
  • This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
    5 Stars By Hazel from Monaco - 2018.06.21 17:11
    Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
    5 Stars By Melissa from Sierra Leone - 2018.10.09 19:07
    Write your message here and send it to us