Natural Diamond Drill Bit

Natural Diamond Drill Bit is suitable for coring in medium to hard formations with a certain degree of abrasive formation.


Product Detail

Product Tags

Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .

Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.

The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.

Introduction:

Natural Diamond Drill Bit is suitable for coring in medium to hard formations with a certain degree of abrasive formation.

Features

1.The unique matrix formula: The unique matrix formula makes the matrix match the wear and formation, optimizes the cutting edge and wear resistance of diamond which makes the bit obtain a better ROP.

Technology

1.Radiant waterway design: The bit has radiant waterway design which is suitable for high speed.

DeepFast’s natural diamond drill bits offer excellent penetration rates and service life in soft formations. These bits work in soft and medium-soft rock types such as limestone, sandstone, clay etc. This drill bit has a hard matrix set with a layer of natural diamond which can be deigned and manufactured to match different types of formations. It can be customized in diamond size , diamond quality, matrix hardness,diamond exposure, crown design and others up to clients.

Product Specifications:

IADC code M323
Number of blades 6
Total flow area 15.9 in2
Cutting structure Impregnated block
Standard gauge length 2.0"50.8 mm
Upper buckle torque 4-1/2" Reg.

 

Flow rate 21~35L/S
Rotating speed 60~300PRM
Drilling pressure 20~110KN

  • Previous:
  • Next:

  • Write your message here and send it to us