Lowest Price for Tricone Drill Bit Manufacturer - Matrix Body PDC Core Bit – DeepFast


Product Detail

Product Tags

Related Video

Feedback (2)

So that you can finest fulfill client's demands, all of our operations are strictly performed in line with our motto "High Excellent, Competitive Price, Fast Service" for Diamond Impregnated Drill Bits, Pdc Drill Bit, Steerable Reamer While Drilling, We warmly welcome all standpoint inquiries from home and abroad to cooperate with us, and anticipate your correspondence.
Lowest Price for Tricone Drill Bit Manufacturer - Matrix Body PDC Core Bit – DeepFast Detail:

Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .

Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.

The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.

Introduction:

It is resistant to erosion with long service life which can greatly improve drilling effeciency and save cost.

Features

1.Drilling in medium to hard formations: The drill bit has medium and short parabolic crowns, knife-wing teeth and medium-high density cloth teeth. It can obtain higher rotary speed in formations with low compressive strength and a small amount of abrasiveness.

2.Proprietary Cutting Teeth: 13mm imported special cutting teeth improves the ability to drill hard interlayer.

3.Strengthened Gauge: The use of high strength material improves the wear resistance of gauge and makes it have a longer life with the drill bits.

Product Specifications:

IADC code M232
Number of blades 12
Total flow area 0.2~1.0 in2(1.3~6.5 cm2)
Main cutting tooth 13
Standard gauge length 1″~1.5″(25~38 mm)
Upper buckle torque 13.4~16.3KN·m
Core barrel size 6-3/4″×4″

Recommended Operating Parameters:

Flow rate 10~30 L/S
Rotating speed 40~150 RPM
Drilling pressure 30~80KN

Product detail pictures:

Lowest Price for Tricone Drill Bit Manufacturer - Matrix Body PDC Core Bit – DeepFast detail pictures

Lowest Price for Tricone Drill Bit Manufacturer - Matrix Body PDC Core Bit – DeepFast detail pictures

Lowest Price for Tricone Drill Bit Manufacturer - Matrix Body PDC Core Bit – DeepFast detail pictures


Related Product Guide:

High quality Very first,and Shopper Supreme is our guideline to offer the most beneficial company to our clients.Nowadays, we're hoping our best to be certainly one of the top exporters in our area to satisfy consumers additional will need for Lowest Price for Tricone Drill Bit Manufacturer - Matrix Body PDC Core Bit – DeepFast , The product will supply to all over the world, such as: Florence, Berlin, Niger, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
  • We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
    5 Stars By Emma from Afghanistan - 2017.09.28 18:29
    The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
    5 Stars By Matthew from Oman - 2018.12.25 12:43
    Write your message here and send it to us