High Quality for Drill Bits Suppliers In South Africa - Impregnated Core Bit – DeepFast


Product Detail

Product Tags

Related Video

Feedback (2)

As a result of ours specialty and service consciousness, our company has won a good reputation among customers all over the world for Drill Rig Machine, Pdc Bit 6 1/2" 6 Blades, Impregnated Bit, The team of our company with the use of cutting-edge technologies delivers impeccable quality products supremely adored and appreciated by our customers worldwide.
High Quality for Drill Bits Suppliers In South Africa - Impregnated Core Bit – DeepFast Detail:

Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .

Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.

The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.

Drilling in extremely hard formations It is suitable for coring in extremely hard abrasive formations, such as sandstone.

Features

◆Curved crown
The curved crown has a smooth core

◆Radiant waterway design
The bit has radiant waterway design which is suitable for high speed.

Technology

◆The self-sharpening impregnated insert
The self-sharpening impregnated insert keeps the cutting sharp during drilling.

◆The unique matrix formula
The unique matrix formula makes the matrix match the wear and formation,optimizes the cutting

Introduction:

It is suitable for coring in extremely hard abrasive formations, such as sandstone.

Features

1.Curved crown: The curved crown has a smooth core

2.The self-sharpening impregnated insert: The self-sharpening impregnated insert keeps the cutting sharp during drilling.

3.The unique matrix formula: The unique matrix formula makes the matrix match the wear and formation, optimizes the cutting edge and wear resistance of diamond which makes the bit obtain a better ROP.

4.Radiant waterway design: The bit has radiant waterway design which is suitable for high speed.

Product Specifications:

 

IADC code M842
Number of blades 15
Total flow area 1.0 in2
Cutting structure Pregnancy block
Standard gauge length 1-1/2″38.1 mm
Upper buckle torque 13.4~16.3KN•m
Core barrel size 6-3/4″×4″(川7-4/5)

Recommended Operating Parameters:

Flow rate 10~30 L/S
Rotating speed 40~150RPM
Drilling pressure 30~80 KN

Impregnated Core Bit Complete Core Service

in Extremely Hard and Deep Formation

4-2

CHALLENGES

Extremely hard and abrasive formation

The depth is about 4,000 meters

Request for high recovery rate

SOLUTION

In order to solve these problems, DeepFast offers Impregnated Core Bit 8 1/2” x 4” DIC280 to achieve this goal in deep and hard formation.

RESULTS

With the core cut 1 15 meters in two runs. which is from 3805 to 3920 meters

The coring time is about 20 hours, and ROPIS 5.75 m/h

The recovery rate is more than 85%

Overview

In the Liaohe Oilfield in China, the operator Liaohe Oilfield Coring Technology Services planned to drilling in the deep well of 3805 meters. The formation is extremely hard and lithology is granite with the compress strength more than 24000PSL. Its objective was to core the 8 1/2” hole section of the well to recover the hard formation. The normal PDC core bit had only low recover rate and less core cut. Therefore Deepfast offers its new designed Impregnated Core Bit to achieve this goal in deep and hard formation.


Product detail pictures:

High Quality for Drill Bits Suppliers In South Africa - Impregnated Core Bit – DeepFast detail pictures

High Quality for Drill Bits Suppliers In South Africa - Impregnated Core Bit – DeepFast detail pictures


Related Product Guide:

We usually continually offer you the most conscientious consumer services, along with the widest variety of designs and styles with finest materials. These initiatives include the availability of customized designs with speed and dispatch for High Quality for Drill Bits Suppliers In South Africa - Impregnated Core Bit – DeepFast , The product will supply to all over the world, such as: Oman, United Arab Emirates, Ecuador, Our expert engineering team will generally be prepared to serve you for consultation and feedback. We are able to also offer you with free of charge samples to meet your requirements. Best efforts will likely be produced to provide you the best service and merchandise. When you are keen on our business and products, please speak to us by sending us emails or call us quickly. In an effort to know our products and company extra, you may come to our factory to view it. We will generally welcome guests from all over the world to our business to create business relations with us. Please feel cost-free to speak to us for small business and we believe we'll share the best trading experience with all our merchants.
  • The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
    5 Stars By Anne from Turkey - 2017.05.02 11:33
    The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
    5 Stars By Hulda from Marseille - 2017.10.25 15:53
    Write your message here and send it to us