Good quality 1305 Pdc Bit - Impregnated Core Bit – DeepFast


Product Detail

Product Tags

Related Video

Feedback (2)

Assume full obligation to meet all demands of our customers; accomplish ongoing advancements by promoting the advancement of our customers; become the final permanent cooperative partner of clientele and maximize the interests of shoppers for Pdc Bit 6 1/2", Oil Drilling Equipments, Nozzle, We welcome new and previous customers from all walks of lifestyle to call us for upcoming business enterprise interactions and reach mutual accomplishment!
Good quality 1305 Pdc Bit - Impregnated Core Bit – DeepFast Detail:

Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .

Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.

The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.

Drilling in extremely hard formations It is suitable for coring in extremely hard abrasive formations, such as sandstone.

Features

◆Curved crown
The curved crown has a smooth core

◆Radiant waterway design
The bit has radiant waterway design which is suitable for high speed.

Technology

◆The self-sharpening impregnated insert
The self-sharpening impregnated insert keeps the cutting sharp during drilling.

◆The unique matrix formula
The unique matrix formula makes the matrix match the wear and formation,optimizes the cutting

Introduction:

It is suitable for coring in extremely hard abrasive formations, such as sandstone.

Features

1.Curved crown: The curved crown has a smooth core

2.The self-sharpening impregnated insert: The self-sharpening impregnated insert keeps the cutting sharp during drilling.

3.The unique matrix formula: The unique matrix formula makes the matrix match the wear and formation, optimizes the cutting edge and wear resistance of diamond which makes the bit obtain a better ROP.

4.Radiant waterway design: The bit has radiant waterway design which is suitable for high speed.

Product Specifications:

 

IADC code M842
Number of blades 15
Total flow area 1.0 in2
Cutting structure Pregnancy block
Standard gauge length 1-1/2″38.1 mm
Upper buckle torque 13.4~16.3KN•m
Core barrel size 6-3/4″×4″(川7-4/5)

Recommended Operating Parameters:

Flow rate 10~30 L/S
Rotating speed 40~150RPM
Drilling pressure 30~80 KN

Impregnated Core Bit Complete Core Service

in Extremely Hard and Deep Formation

4-2

CHALLENGES

Extremely hard and abrasive formation

The depth is about 4,000 meters

Request for high recovery rate

SOLUTION

In order to solve these problems, DeepFast offers Impregnated Core Bit 8 1/2” x 4” DIC280 to achieve this goal in deep and hard formation.

RESULTS

With the core cut 1 15 meters in two runs. which is from 3805 to 3920 meters

The coring time is about 20 hours, and ROPIS 5.75 m/h

The recovery rate is more than 85%

Overview

In the Liaohe Oilfield in China, the operator Liaohe Oilfield Coring Technology Services planned to drilling in the deep well of 3805 meters. The formation is extremely hard and lithology is granite with the compress strength more than 24000PSL. Its objective was to core the 8 1/2” hole section of the well to recover the hard formation. The normal PDC core bit had only low recover rate and less core cut. Therefore Deepfast offers its new designed Impregnated Core Bit to achieve this goal in deep and hard formation.


Product detail pictures:

Good quality 1305 Pdc Bit - Impregnated Core Bit – DeepFast detail pictures

Good quality 1305 Pdc Bit - Impregnated Core Bit – DeepFast detail pictures


Related Product Guide:

Having a positive and progressive attitude to customer's fascination, our organization constantly improves our solution high-quality to fulfill the requirements of shoppers and further focuses on safety, reliability, environmental prerequisites, and innovation of Good quality 1305 Pdc Bit - Impregnated Core Bit – DeepFast , The product will supply to all over the world, such as: UK, Malawi, Germany, Taking the core concept of "to be the Responsible". We'll redound up on society for high quality merchandise and good service. We will initiative to participate in international competition to be a first- class manufacturer of this product in the world.
  • In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
    5 Stars By Alexia from Egypt - 2017.11.01 17:04
    It can be said that this is a best producer we encountered in China in this industry, we feel lucky to work with so excellent manufacturer.
    5 Stars By Mona from Vancouver - 2017.10.27 12:12
    Write your message here and send it to us