Factory making Diamond Core Bits For Granite - Micro Core Bit – DeepFast
Factory making Diamond Core Bits For Granite - Micro Core Bit – DeepFast Detail:
Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .
Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.
The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.
Introduction:
It is suitable for coring operations in medium and hard formation with long life time feature.
Features
1.Unique Blade Design: Importing exclusive cutting teeth and unique curved blade design improve the ability of drilling in hard interlayer.
2. The high-quality composite: It effectively improves the performance and life of the drill bit. Cutting structure has strong aggressiveness.
3. The special layout: The special layout of the blade water hole improves the cooling and cleaning ability of the bit, and improves the efficiency of cuttings migration.
Product Specifications:
IADC code | M715 |
Number of blades | 12 |
Total flow area | 0.8~1.0 in2 |
Cutting structure | Natural Diamond |
Standard gauge length | 1-1/2“(38.1 mm) |
Upper buckle torque | 7.0~11.5KN·m |
Core barrel size | 4-3/4“×2 5/8“(Chuan 5-4/5) |
Recommended Operating Parameters:
Flow rate | 10~15 L/S |
Rotary Speed | 40~100 RPM |
Weight on bit | 20~75 KN |
Product detail pictures:
Related Product Guide:
Dedicated to strict high-quality management and considerate shopper company, our experienced team associates are normally available to discuss your requirements and ensure full shopper gratification for Factory making Diamond Core Bits For Granite - Micro Core Bit – DeepFast , The product will supply to all over the world, such as: Kyrgyzstan, Cambodia, US, Our domestic website's generated over 50, 000 purchasing orders every year and quite successful for internet shopping in Japan. We would be happy to have an opportunity to do business with your company. Looking forward to receiving your message !
By Maria from Algeria - 2018.11.22 12:28
The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
By Rachel from Turkmenistan - 2018.04.25 16:46