Cheap price Oil Drill Bit Manufacturers - Impregnated Core Bit – DeepFast


Product Detail

Product Tags

Related Video

Feedback (2)

"Sincerity, Innovation, Rigorousness, and Efficiency" may be the persistent conception of our organization for that long-term to establish jointly with customers for mutual reciprocity and mutual gain for Oil Well Drill Bit Manufacture, 1606 Pdc Bit, Oil Drill Bit Cost, Hope we can create a more glorious future with you through our efforts in the future.
Cheap price Oil Drill Bit Manufacturers - Impregnated Core Bit – DeepFast Detail:

Design for higher ROP in drilling deeper and harder formations, PDC drill bit always drills from ground to bottom directly with less or even a single run, saving large amount of drill time and cost .

Differ from tricone bit, PDC drill bit runs with lower WOB but Higher RPM, so it usually works with downhole motor to pick up rotating speed.

The performance of PDC drill bit depends a lot on PDC cutters, we provide unique solution to specific requirement on varied formations.

Drilling in extremely hard formations It is suitable for coring in extremely hard abrasive formations, such as sandstone.

Features

◆Curved crown
The curved crown has a smooth core

◆Radiant waterway design
The bit has radiant waterway design which is suitable for high speed.

Technology

◆The self-sharpening impregnated insert
The self-sharpening impregnated insert keeps the cutting sharp during drilling.

◆The unique matrix formula
The unique matrix formula makes the matrix match the wear and formation,optimizes the cutting

Introduction:

It is suitable for coring in extremely hard abrasive formations, such as sandstone.

Features

1.Curved crown: The curved crown has a smooth core

2.The self-sharpening impregnated insert: The self-sharpening impregnated insert keeps the cutting sharp during drilling.

3.The unique matrix formula: The unique matrix formula makes the matrix match the wear and formation, optimizes the cutting edge and wear resistance of diamond which makes the bit obtain a better ROP.

4.Radiant waterway design: The bit has radiant waterway design which is suitable for high speed.

Product Specifications:

 

IADC code M842
Number of blades 15
Total flow area 1.0 in2
Cutting structure Pregnancy block
Standard gauge length 1-1/2″38.1 mm
Upper buckle torque 13.4~16.3KN•m
Core barrel size 6-3/4″×4″(川7-4/5)

Recommended Operating Parameters:

Flow rate 10~30 L/S
Rotating speed 40~150RPM
Drilling pressure 30~80 KN

Impregnated Core Bit Complete Core Service

in Extremely Hard and Deep Formation

4-2

CHALLENGES

Extremely hard and abrasive formation

The depth is about 4,000 meters

Request for high recovery rate

SOLUTION

In order to solve these problems, DeepFast offers Impregnated Core Bit 8 1/2” x 4” DIC280 to achieve this goal in deep and hard formation.

RESULTS

With the core cut 1 15 meters in two runs. which is from 3805 to 3920 meters

The coring time is about 20 hours, and ROPIS 5.75 m/h

The recovery rate is more than 85%

Overview

In the Liaohe Oilfield in China, the operator Liaohe Oilfield Coring Technology Services planned to drilling in the deep well of 3805 meters. The formation is extremely hard and lithology is granite with the compress strength more than 24000PSL. Its objective was to core the 8 1/2” hole section of the well to recover the hard formation. The normal PDC core bit had only low recover rate and less core cut. Therefore Deepfast offers its new designed Impregnated Core Bit to achieve this goal in deep and hard formation.


Product detail pictures:

Cheap price Oil Drill Bit Manufacturers - Impregnated Core Bit – DeepFast detail pictures

Cheap price Oil Drill Bit Manufacturers - Impregnated Core Bit – DeepFast detail pictures


Related Product Guide:

Sticking for the perception of "Creating products of top quality and producing friends with people today from all around the world", we constantly place the desire of shoppers to start with for Cheap price Oil Drill Bit Manufacturers - Impregnated Core Bit – DeepFast , The product will supply to all over the world, such as: United States, Oslo, Slovenia, We have been very responsible for all details on our customers order no matter on warranty quality, satisfied prices, quick delivery, on time communication, satisfied packing, easy payment terms, best shipment terms, after sales service etc. We provide one-stop service and best reliability to our every customers. We work hard with our customers, colleagues, workers to make a better future.
  • The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
    5 Stars By Jodie from Macedonia - 2017.02.14 13:19
    The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
    5 Stars By Ray from Malta - 2017.08.28 16:02
    Write your message here and send it to us